00-99-001000/0710Jump Starter and DC Power Source Sears Brands Management Corporation, Hoffman Estates, IL 60179 U.S.A.Read and follow all Safety Rule
• 7 •Powering a 12V DC Device:8.2 The jump starter is a power source for all 12V DC accessories that are equipped with a 12V accessory plug. Use it fo
• 8 •MAINTENANCE INSTRUCTIONS9. After use and before performing maintenance, unplug and disconnect the jump 9.1 starter (see sections 3 and 4).Use a d
• 9 •TROUBLESHOOTING11. PROBLEM POSSIBLE CAUSE REASON/SOLUTIONThe jump starter won’t jump start my car.Clips are not making a good connection to the b
CONTAINS SEALED NON-SPILLABLE LEAD-ACID BATTERY. MUST BE DISPOSED OF PROPERLY.WARNING: Possible explosion hazard. Contact with battery acid may cau
• 1 •IMPORTANT: READ AND SAVE THIS SAFETY AND INSTRUCTION MANUAL.SAVE THESE INSTRUCTIONS – Charge the jump starter internal battery immediately after
• 2 •IMPORTANT SAFETY INSTRUCTIONS - SAVE THESE INSTRUCTIONS - 1. This manual contains important safety and operating instructionsRISK OF ELECTRIC SHO
• 3 •PERSONAL PRECAUTIONS2. RISK OF EXPLOSIVE GASES. A SPARK NEAR THE BATTERY MAY CAUSE A BATTERY EXPLOSION. TO REDUCE THE RISK OF A SPARK NEAR THE BA
• 4 •FOLLOW THESE STEPS WHEN CONNECTING TO A BATTERY3. A SPARK NEAR THE BATTERY MAY CAUSE A BATTERY EXPLOSION. TO REDUCE THE RISK OF A SPARK NEAR THE
• 5 •GROUNDING AND AC POWER CORD CONNECTIONS4. RISK OF ELECTRIC SHOCK OR FIRE.The jump starter internal charger plug is for use on a nominal 120-volt
• 6 •Charging the Internal Battery using the Built-In Charger:7.2 To charge, plug an 18 gauge (AWG) or larger extension cord into the 1. charger plug
Kommentare zu diesen Handbüchern